Pneumatic

Pneumatic components, systems & spares

Click Here

Lubrication

Centralised lubrication systems & spares

Click Here

Hydraulic

Hydraulic system, spares and components

Click Here

Lubricants

Industrial Electricals spares, components and system

Click Here

Ball Valves

All ball valves utilize a floating ball design with a blowout proof stem.  Seats are PTFE - suitable for a variety of chemical and temperature variations.  Wetted parts are 316 stainless steel and design options include the one piece ball valve, two piece ball valve, three piece ball valve, flanged ball valve, three way ball valve  and sanitary ball valve.

One piece ball valves are an economical choice for a reduced port design for on/off applications with pressures to 1000 psi. Ends are threaded to ANSI B2.1.  Size range is 1/4" thru 2". Valves come standard with blowout proof stem and locking lever handle.

 

 

 

 


Two piece ball valves offer a full port design with the capability of on/off shutoff with pressures up to 1000 psi or 2000 psi.  Ends are threaded to ANSI B2.1. Size range is 1/4" to 3".  Standard features are adjustable packing gland, blow out proof stem and locking lever handle.

 

 

 

 


Three piece ball valves offer a full ported design that allows for easy replacement of ball and seals with the valve still in the line.  Pressure rating is 1000 psi.  Available end styles are screwed, socket weld, butt weld and flanged ends for the ball valves.  Size range is 1/4 inch to 4 inches.  We offer a direct mount version of this valve for actuation with a motor or cylinder actuator.  Additional features include a blow out proof stem, adjustable packing gland and locking handle.

 

 

 


Flanged ball valves offer a full ported design with ANSI 150# flanged ends.  Size range is 1/2" to 8".  Standard features are an antistatic device, ISO mounting pad, blowout proof stem and lever operator.

 

 

 

 


Two piece ball valves offer a full port design with the capability of on/off shutoff with pressures up to 1000 psi.  Ends are male by female threaded and male to male to ANSI B2.1. Size range is 1/4" to 2".  Standard features are adjustable packing gland, blow out proof stem and locking lever handle.

 

 

 

 


L/T Three way ball valves offer a compact alternative to direct flow in many different port configurations.  Pressure rating is 1000 psi and the ends are threaded to ANSI B2.1.  Standard features include actuator mounting pad, blow out proof stem, adjustable packing and locking lever handle.

 

 

 

 


L/T 3 and 4 way flanged ball valves offer a compact alternative to direct flow in many different port configurations.  Pressure rating is 1000 psi and the ends are threaded to ANSI B16.5.  Standard features include actuator mounting pad, full port design, ball and stem are a single piece, trunnion mounted, adjustable packing and locking lever handle.

 

 

 

 


Sanitary ball valve offers the advantage of PTFE cavity fillers fully encapsulating the ball.  With no voids for fluid to settle this valve suits the food, beverage, and chemical industry.  This valve is full ported and clamp (tri-clover) ends are standard.  The three piece design allows for easy replacement on the ball, seats and cavity fillers with out removing the valve from the line.

 

 

 

 


Sanitary three way ball valve offers the advantage of PTFE cavity fillers fully encapsulating the ball.  The PSS 20 is available in both T and L Port configurations.  With no voids for fluid to settle this valve suits the food, beverage, and chemical industry.  This valve is full ported and clamp (tri-clover) ends are standard.  The three piece design allows for easy replacement on the ball, seats and cavity fillers with out removing the valve from the line.